Smoothing Nozzle Attachment for Dyson Supersonic HD01 HD02 HD03 967715-01 Black
$13.99
A clip-on smoothing nozzle for the Dyson Supersonic HD01, HD02 and HD03. It narrows the airflow into a flat, wide blade of air so you can point heat at the roots and down the length of the hair instead of blasting it in every direction. Twist-lock fitting, no tools, no adaptor.
- 描述
描述
Smoothing Nozzle for Dyson Supersonic — the wide, flat blade of air that turns a fast dryer into a finishing tool
The standard Supersonic is built to move a lot of air, quickly. That is exactly what you want on soaking wet hair and exactly what you do not want when you are trying to land a smooth finish, because a wide-open airflow scatters the hair and lifts the cuticle instead of laying it down. This nozzle fixes that one problem: it takes the dryer’s output and reshapes it into a flat, directional sheet of air.
It is a compatible third-party attachment, not a Dyson part. It clips onto the same bayonet fitting, sits flush, and does the same job as the original smoothing nozzle that ships with the dryer. If yours has been lost, cracked, or was never in the box, this is the cheap way to get the function back.
Which dryers it fits
The seller lists compatibility as HD01, HD02 and HD03, against Dyson part number 967715-01. Check the model code printed on the handle of your dryer before you order — the Supersonic range has grown well past those three codes, and later models (HD04, HD08, HD15 and up) use a different attachment interface. If your dryer is not an HD01, HD02 or HD03, this nozzle is not the one you need.
The fitting is the standard Supersonic twist-lock: push on, rotate until it seats, and it holds. No adaptor ring, no tools, and it comes off just as easily for cleaning or for swapping to a different head.
What the narrower airflow actually does
It puts the air where you aim it
The outlet is a flattened slot rather than a circle. That shape keeps the airstream together over a longer distance, so the air arrives at the section of hair you are working on instead of dispersing before it gets there. Practically: you can rough-dry the roots and then run the nozzle down the length in one continuous pass, which is the motion most people are already trying to do with the bare dryer.
It smooths by direction, not by heat
The smoothing effect comes from pointing the airflow down the hair shaft. Air moving in the direction of the cuticle lays it flat; air hitting the hair from every angle lifts it. That is why the before/after on this listing looks the way it does, and why the technique matters more than the temperature setting. Use medium heat and medium speed, aim down the length, and finish with the cold shot to set the shape.
It is gentler on the hair than a concentrator used at full power
Because the air is focused, you need less of it. Turning the dryer down and letting the nozzle do the directing is easier on the hair than blasting at maximum speed with nothing attached — less tangling, less mechanical wear on wet hair, and a finish that holds without needing a straightener afterwards.
Specifications
| Part number | 967715-01 |
|---|---|
| Fits | Dyson Supersonic HD01 / HD02 / HD03 |
| Function | Smoothing / concentrator nozzle |
| Colour | Black |
| Material | Plastic |
| Fitting | Twist-lock, tool-free |
| Contents | 1 × smoothing nozzle |
| Packaged dimensions | 5.2 × 4.06 × 1.77 in |
| Item weight | 1.41 oz (0.04 kg) |
| UPC | 729107950727 |
| Manufacturer | Chuancheng |
In the box
- 1 × smoothing nozzle, black — attachment only
This is the attachment on its own. No hair dryer is included. The product photo on this page shows the nozzle fitted to a dryer to demonstrate the fitting; that dryer is not part of what you buy.
Who it suits
- Anyone who lost the original — the smoothing nozzle is the first attachment to go missing because it is the one people leave on the dryer. Replacing it costs a fraction of a new head from Dyson.
- Straight, fine or frizz-prone hair — the directional airflow is most obvious on hair that shows every flyaway. Coarse curls get less from it; a diffuser is the better head for those.
- People who blow-dry and then flat-iron — pointing the air down the shaft during drying is what removes the need for the second step.
- Bleached or heat-damaged hair — you can dry at a lower speed and still get directional control, which is the whole point when the hair is fragile.
- Second dryers and travel kits — a spare nozzle for the bag costs less than remembering to pack the original.
Frequently asked questions
Will it fit my Supersonic?
Only if your dryer is an HD01, HD02 or HD03. The model code is printed on the handle near the filter. Later Supersonic models changed the attachment interface, and this nozzle will not seat on them.
Is this a genuine Dyson part?
No. It is a compatible attachment made by Chuancheng. It fits the same fitting and performs the same function, but it is not manufactured or sold by Dyson.
Does it make the dryer quieter or faster?
The seller advertises a 60% time saving and under 75 dB. Treat those as the manufacturer’s figures rather than measurements — the honest answer is that a focused airstream lets you finish a section in fewer passes, so drying feels quicker, but how much quicker depends on your hair and your technique.
Can I use it on wet hair?
Yes, but it is at its best on hair that is already about 80% dry. Use the bare dryer to get the bulk of the water out, then fit the nozzle for the finishing pass — that is where the smooth result comes from.
How do I clean it?
Wipe the inside of the slot with a dry cloth, or rinse it and let it dry completely before refitting. Product build-up inside the outlet disturbs the airstream and undoes the smoothing effect.
What buyers say
4.0 out of 5 from 427 ratings on Amazon, where it is tagged Amazon’s Choice in Hair Dryer Concentrator Nozzles and ranked #4 in that category. 61% of ratings are five-star.
Amazon’s own review summary reports that buyers find it fits perfectly, works well and is good value, with one noting it is “just as good as OEM replacement parts” — while the magnet strength and alignment draw mixed comments. That matches the price bracket: this is a value replacement, not a finished-like-the-original one.
Footnotes
Compatibility, part number, materials, dimensions and the aggregate rating are as published by the seller on the Amazon listing for ASIN B0959C2QL1, retrieved 21 October 2026. This is a compatible accessory, not a Dyson-manufactured product; “Dyson” and “Supersonic” are trademarks of Dyson Technology Limited and are used here only to describe what this part fits. Performance figures (time saving, noise level) are the manufacturer’s claims.
